Back to Details

gsd-graphify

Compare original and translation side by side

🇺🇸

Original

English
🇨🇳

Translation

Chinese
STOP -- DO NOT READ THIS FILE. You are already reading it. This prompt was injected into your context by Claude Code's command system. Using the Read tool on this file wastes tokens. Begin executing Step 0 immediately.
CJS-only (graphify): 
graphify
subcommands are not registered on 
gsd-tools query
. Use the 
gsd_run
launcher shim (defined in each bash block below) or invoke the binary directly: 
node <runtime-home>/gsd-core/bin/gsd-tools.cjs graphify …
where 
<runtime-home>
is your runtime's config directory (e.g. 
~/.claude
, 
~/.hermes
, 
~/.cursor
). See 
docs/CLI-TOOLS.md
for details. Other tooling may still use 
gsd-tools query
where a handler exists.
停止阅读此文件。你正在阅读它。此提示由Claude Code的命令系统注入到你的上下文环境中。使用Read工具读取此文件会浪费token。请立即开始执行步骤0。
仅支持CJS（graphify）：
graphify
子命令未在
gsd-tools query
中注册。请使用
gsd_run
启动垫片（在下方每个bash块中定义）或直接调用二进制文件：
node <runtime-home>/gsd-core/bin/gsd-tools.cjs graphify …
，其中
<runtime-home>
是你运行时的配置目录（例如
~/.claude
、
~/.hermes
、
~/.cursor
）。详情请参阅
docs/CLI-TOOLS.md
。如果存在处理程序，其他工具仍可使用
gsd-tools query
。

Step 0 -- Banner

步骤0 -- 横幅

Before ANY tool calls, display this banner:
GSD > GRAPHIFY
Then proceed to Step 1.
在进行任何工具调用之前，显示以下横幅：
GSD > GRAPHIFY
然后继续执行步骤1。

Step 1 -- Config Gate

步骤1 -- 配置检查

Check if graphify is enabled by reading 
.planning/config.json
directly using the Read tool.
DO NOT use the gsd-tools config get-value command -- it hard-exits on missing keys.
  1. Read 
    .planning/config.json
    using the Read tool
  2. If the file does not exist: display the disabled message below and STOP
  3. Parse the JSON content. Check if 
    config.graphify && config.graphify.enabled === true
  4. If 
    graphify.enabled
    is NOT explicitly 
    true
    : display the disabled message below and STOP
  5. If 
    graphify.enabled
    is 
    true
    : proceed to Step 2
Disabled message:
GSD > GRAPHIFY

Knowledge graph is disabled. To activate:

  node <runtime-home>/gsd-core/bin/gsd-tools.cjs config-set graphify.enabled true

Then run /gsd-graphify build to create the initial graph.
使用Read工具直接读取
.planning/config.json
，检查graphify是否已启用。
请勿使用gsd-tools config get-value命令——该命令在缺少键时会强制退出。
  1. 使用Read工具读取
    .planning/config.json
  2. 如果文件不存在：显示下方的禁用消息并停止操作
  3. 解析JSON内容，检查
    config.graphify && config.graphify.enabled === true
    是否成立
  4. 如果
    graphify.enabled
    未明确设置为
    true
    ：显示下方的禁用消息并停止操作
  5. 如果
    graphify.enabled
    为
    true
    ：继续执行步骤2
禁用消息：
GSD > GRAPHIFY

知识图谱已禁用。如需启用：

  node <runtime-home>/gsd-core/bin/gsd-tools.cjs config-set graphify.enabled true

然后运行/gsd-graphify build以创建初始图谱。

Step 2 -- Parse Argument

步骤2 -- 解析参数

Parse 
$ARGUMENTS
to determine the operation mode:
ArgumentAction
build
Run inline build (Step 3)
query <term>
Run inline query (Step 2a)
status
Run inline status check (Step 2b)
diff
Run inline diff check (Step 2c)
No argument or unknownShow usage message
Usage message (shown when no argument or unrecognized argument):
GSD > GRAPHIFY

Usage: /gsd-graphify <mode>

Modes:
  build           Build or rebuild the knowledge graph
  query <term>    Search the graph for a term
  status          Show graph freshness and statistics
  diff            Show changes since last build
解析
$ARGUMENTS
以确定操作模式：
参数操作
build
运行内联构建（步骤3）
query <term>
运行内联查询（步骤2a）
status
运行内联状态检查（步骤2b）
diff
运行内联差异检查（步骤2c）
无参数或未知参数显示使用说明
使用说明（无参数或参数不识别时显示）：
GSD > GRAPHIFY

用法：/gsd-graphify <mode>

模式：
  build           构建或重建知识图谱
  query <term>    在图谱中搜索指定术语
  status          显示图谱新鲜度和统计信息
  diff            显示自上次构建以来的变更

Step 2a -- Query

步骤2a -- 查询

Run:
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify query <term>
Parse the JSON output and display results:
  • If the output contains 
    "disabled": true
    , display the disabled message from Step 1 and STOP
  • If the output contains 
    "error"
    field, display the error message and STOP
  • If no nodes found, display: 
    No graph matches for '<term>'. Try /gsd-graphify build to create or rebuild the graph.
  • Otherwise, display matched nodes grouped by type, with edge relationships and confidence tiers (EXTRACTED/INFERRED/AMBIGUOUS)
STOP after displaying results. Do not spawn an agent.
运行：
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify query <term>
解析JSON输出并显示结果：
  • 如果输出包含
    "disabled": true
    ，显示步骤1中的禁用消息并停止操作
  • 如果输出包含
    "error"
    字段，显示错误消息并停止操作
  • 如果未找到节点，显示：
    No graph matches for '<term>'. Try /gsd-graphify build to create or rebuild the graph.
  • 否则，按类型分组显示匹配节点，包含边关系和置信度层级（EXTRACTED/INFERRED/AMBIGUOUS）
显示结果后停止操作，不要启动代理。

Step 2b -- Status

步骤2b -- 状态

Run:
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify status
Parse the JSON output and display:
  • If 
    exists: false
    , display the message field
  • Otherwise show last build time, node/edge/hyperedge counts, and STALE or FRESH indicator
  • If 
    built_at_commit
    is non-null, also display a 
    Source commit:
    line: 
    • commit_stale === false
      (rebuilt at HEAD): 
      Source commit: <built_at_commit> (current)
    • commit_stale === true
      (graph behind HEAD): 
      Source commit: <built_at_commit> (<commits_behind> commits behind HEAD)
    • commit_stale === null
      (unreachable commit / no git): 
      Source commit: <built_at_commit> (freshness unknown)
  • If 
    built_at_commit
    is null (pre-graphify-v0.7 graph), omit the source-commit line entirely — do not render "Source commit: unknown"
The mtime-based STALE/FRESH flag and the commit-based 
commit_stale
measure different things and can disagree (e.g., a CI-built graph rebuilt minutes ago against an old checkout reads as FRESH on mtime but 
commit_stale: true
). Surface both so the agent can choose.
STOP after displaying status. Do not spawn an agent.
运行：
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify status
解析JSON输出并显示：
  • 如果
    exists: false
    ，显示消息字段
  • 否则显示上次构建时间、节点/边/超边数量，以及STALE或FRESH标识
  • 如果
    built_at_commit
    非空，还需显示
    Source commit:
    行： 
    • commit_stale === false
      （在HEAD处重建）：
      Source commit: <built_at_commit> (current)
    • commit_stale === true
      （图谱落后于HEAD）：
      Source commit: <built_at_commit> (<commits_behind> commits behind HEAD)
    • commit_stale === null
      （无法访问的提交/无git）：
      Source commit: <built_at_commit> (freshness unknown)
  • 如果
    built_at_commit
    为空（graphify-v0.7之前的图谱），完全省略源提交行——不要显示"Source commit: unknown"
基于修改时间的STALE/FRESH标识和基于提交的
commit_stale
测量的是不同内容，可能会出现不一致（例如，CI构建的图谱在旧检出版本上几分钟前重建，修改时间显示为FRESH但
commit_stale: true
）。需同时显示两者，以便代理选择。
显示状态后停止操作，不要启动代理。

Step 2c -- Diff

步骤2c -- 差异

Run:
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify diff
Parse the JSON output and display:
  • If 
    no_baseline: true
    , display the message field
  • Otherwise show node and edge change counts (added/removed/changed)
If no snapshot exists, suggest running 
build
twice (first to create, second to generate a diff baseline).
STOP after displaying diff. Do not spawn an agent.
运行：
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify diff
解析JSON输出并显示：
  • 如果
    no_baseline: true
    ，显示消息字段
  • 否则显示节点和边的变更数量（新增/删除/修改）
如果不存在快照，建议运行两次
build
（第一次创建，第二次生成差异基线）。
显示差异后停止操作，不要启动代理。

Step 3 -- Build (Inline)

步骤3 -- 内联构建

Run the pre-flight check first:
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify build
Parse the JSON output:
  • If 
    disabled: true
    : display the disabled message from Step 1 and STOP
  • If 
    error
    : display the error message and STOP
  • If 
    action: "spawn_agent"
    : pre-flight passed -- proceed with the inline build below
(The 
spawn_agent
action name is historical. The skill now performs the build inline because graphify v0.7+ split the build into a fast AST-extraction phase and a separate clustering + report-write phase. Sub-agent isolation kept the cached extraction phase alive but SIGTERM'd the post-extraction phase when the agent exited, leaving the cache populated but no 
graph.json
artifacts written. The CLI still emits the 
spawn_agent
signal so external callers and tests keep working.)
Display:
text
GSD > Building knowledge graph...
Run the build, copy artifacts, write the diff snapshot, and report the summary in a single foreground Bash call so the whole pipeline survives to completion. Use a 
timeout
of 
600000
ms (10 minutes), which covers the 
graphify.build_timeout
ceiling (default 300 s) with margin:
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
graphify update . \
  && cp graphify-out/graph.json .planning/graphs/graph.json \
  && { [ -f graphify-out/graph.html ] && cp graphify-out/graph.html .planning/graphs/graph.html || true; } \
  && cp graphify-out/GRAPH_REPORT.md .planning/graphs/GRAPH_REPORT.md \
  && gsd_run graphify build snapshot \
  && gsd_run graphify status
Do NOT pass 
run_in_background: true
. Typical builds complete in 15-60 seconds and the entire chain must run foreground.
If the chain fails (non-zero exit):
  • Display: 
    ## GRAPHIFY BUILD FAILED
    followed by the captured stderr
  • Do NOT delete 
    .planning/graphs/
    -- the prior valid graph remains available
  • STOP
If the chain succeeds:
  • Parse the trailing 
    graphify status
    JSON
  • Display: 
    ## GRAPHIFY BUILD COMPLETE
    with the node, edge, and hyperedge counts
先运行预检：
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
gsd_run graphify build
解析JSON输出：
  • 如果
    disabled: true
    ：显示步骤1中的禁用消息并停止操作
  • 如果
    error
    ：显示错误消息并停止操作
  • 如果
    action: "spawn_agent"
    ：预检通过——继续执行下方的内联构建
（
spawn_agent
操作名称是历史遗留。该技能现在执行内联构建，因为graphify v0.7+将构建拆分为快速AST提取阶段和单独的聚类+报告写入阶段。子代理隔离会在代理退出时终止后台bash，导致提取阶段缓存已填充但未写入
graph.json
artifacts。CLI仍会发出
spawn_agent
信号，以便外部调用者和测试继续正常工作。）
显示：
text
GSD > 正在构建知识图谱...
运行构建、复制 artifacts、写入差异快照，并通过单个前台Bash调用报告摘要，确保整个管道执行完成。使用
timeout
为
600000
毫秒（10分钟），为
graphify.build_timeout
上限（默认300秒）留出余量：
bash
_GSD_SHIM_NAME="gsd-tools.cjs"; _GSD_RUNTIME_ROOT="${RUNTIME_DIR:-$(git rev-parse --show-toplevel 2>/dev/null || pwd)}"; GSD_TOOLS="${_GSD_RUNTIME_ROOT}/gsd-core/bin/${_GSD_SHIM_NAME}"; if [ -f "$GSD_TOOLS" ]; then gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${_GSD_RUNTIME_ROOT}/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif command -v gsd-tools >/dev/null 2>&1; then GSD_TOOLS="$(command -v gsd-tools)"; gsd_run() { "$GSD_TOOLS" "$@"; }; elif [ -f "$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="$HOME/.claude/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${HERMES_HOME:-$HOME/.hermes}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CURSOR_CONFIG_DIR:-$HOME/.cursor}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEX_HOME:-$HOME/.codex}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GEMINI_CONFIG_DIR:-$HOME/.gemini}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${COPILOT_CONFIG_DIR:-$HOME/.copilot}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${WINDSURF_CONFIG_DIR:-$HOME/.codeium/windsurf}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${AUGMENT_CONFIG_DIR:-$HOME/.augment}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${TRAE_CONFIG_DIR:-$HOME/.trae}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${QWEN_CONFIG_DIR:-$HOME/.qwen}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CODEBUDDY_CONFIG_DIR:-$HOME/.codebuddy}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${CLINE_CONFIG_DIR:-$HOME/.cline}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${GROK_AGENTS_HOME:-$HOME/.agents}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${ANTIGRAVITY_CONFIG_DIR:-$HOME/.gemini/antigravity}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${OPENCODE_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/opencode}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; elif [ -f "${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}" ]; then GSD_TOOLS="${KILO_CONFIG_DIR:-${XDG_CONFIG_HOME:-$HOME/.config}/kilo}/gsd-core/bin/${_GSD_SHIM_NAME}"; gsd_run() { node "$GSD_TOOLS" "$@"; }; else echo "ERROR: gsd-tools.cjs not found at $GSD_TOOLS and gsd-tools is not on PATH. Run: npx -y @opengsd/gsd-core@latest --claude --local" >&2; exit 1; fi
graphify update . \
  && cp graphify-out/graph.json .planning/graphs/graph.json \
  && { [ -f graphify-out/graph.html ] && cp graphify-out/graph.html .planning/graphs/graph.html || true; } \
  && cp graphify-out/GRAPH_REPORT.md .planning/graphs/GRAPH_REPORT.md \
  && gsd_run graphify build snapshot \
  && gsd_run graphify status
请勿传递
run_in_background: true
。典型构建在15-60秒内完成，整个流程必须在前台执行。
如果流程失败（非零退出码）：
  • 显示：
    ## GRAPHIFY BUILD FAILED
    ，后跟捕获的stderr
  • 请勿删除
    .planning/graphs/
    ——之前的有效图谱仍可使用
  • 停止操作
如果流程成功：
  • 解析末尾的
    graphify status
    JSON
  • 显示：
    ## GRAPHIFY BUILD COMPLETE
    ，包含节点、边和超边数量

MVP-Mode Node Rendering

MVP模式节点渲染

MVP-mode rendering. When a phase has 
**Mode:** mvp
in ROADMAP.md (resolved via 
gsd-tools query roadmap.get-phase --pick mode
), render its graph node with two distinct visual signals:
  1. Distinct fill color. Use 
    #22c55e
    (green) for MVP-mode phase nodes. Standard phases keep the default fill color. Two-channel signaling (color + label) handles color-blind and grayscale renders.
  2. MVP
    label suffix.     Append 
     (MVP)
    to the node's label text. Example: a phase originally labeled 
    Phase 1: User Auth
    renders as 
    Phase 1: User Auth (MVP)
    .
Both signals fire together — never just one. Per PRD Q5 decision, the goal is unambiguous visual distinction in any render context.
When the phase mode is null/absent, render with the standard color and label — no behavioral change for non-MVP phases.
MVP模式渲染。当ROADMAP.md中的阶段包含
**Mode:** mvp
时（通过
gsd-tools query roadmap.get-phase --pick mode
解析），其图谱节点需使用两种不同的视觉标识：
  1. 独特填充色。MVP模式阶段节点使用
    #22c55e
    （绿色）。标准阶段保留默认填充色。双渠道标识（颜色+标签）可适配色盲和灰度渲染场景。
  2. MVP
    标签后缀    。在节点标签文本后追加
     (MVP)
    。示例：原标签为
    Phase 1: User Auth
    的阶段将渲染为
    Phase 1: User Auth (MVP)
    。
两种标识需同时使用——不可单独使用。根据PRD Q5决策，目标是在任何渲染环境中实现明确的视觉区分。
当阶段模式为null/不存在时，使用标准颜色和标签渲染——非MVP阶段无行为变化。

Anti-Patterns

反模式

  1. DO NOT spawn an agent for any operation -- build, query, status, and diff all run inline. Sub-agent isolation terminates background bash when the agent exits, which previously truncated graphify builds mid-write and left only the cache populated (#3166).
  2. DO NOT pass 
    run_in_background: true
    for the build chain -- the operation is fast and must complete in the foreground.
  3. DO NOT modify graph files directly -- always go through 
    graphify update .
    and the snapshot CLI.
  4. DO NOT skip the config gate check.
  5. DO NOT use 
    gsd-tools config get-value
    for the config gate -- it exits on missing keys.
  1. 请勿为任何操作启动代理——构建、查询、状态和差异均需内联运行。子代理隔离会在代理退出时终止后台bash，此前曾导致graphify构建中途截断，仅留下填充的缓存（#3166）。
  2. 请勿为构建流程传递
    run_in_background: true
    ——操作速度快，必须在前台完成。
  3. 请勿直接修改图谱文件——始终通过
    graphify update .
    和快照CLI进行操作。
  4. 请勿跳过配置检查步骤。
  5. 请勿使用
    gsd-tools config get-value
    进行配置检查——该命令在缺少键时会退出。