NeuroArxiv

Vibecoders don't waste hours because they lack skill. They waste hours because they start building before checking whether the hard part has already been solved and published, with the failure modes already known. arXiv is the world's largest source of truth for "has anyone done this" — and almost nobody about to write code actually reads it first. This skill makes the agent read it first.

Pre-flight (run before Phase 1)

This skill is expensive: a real arXiv fetch plus roughly one isolated Agent call per paper (typically 10-20), plus scoring, clustering, and convergence. Do not pay that cost when there's no real prior art to find.

Step 1. Explicit invocation check.

If the user typed

/neuroarxiv

, explicitly asked to "check arXiv", "check prior art", or "run NeuroArxiv", skip the rest of this section and go straight to Phase 1. The user opted in.

Step 2. Self-judge (only if Step 1 did not match).

Ask yourself three questions. If the answer to any is no, ABORT.

Is there a technical mechanism to research? Naming a variable, wiring a CRUD form, or gluing two documented SDKs together has no prior-art question worth asking. Designing a caching strategy, a consensus/coordination scheme, a ranking or retrieval approach, an ML training or inference technique, a novel protocol, or anything where "the naive version breaks at scale" — does.
Is the user about to commit real effort to it? A one-off script doesn't earn a literature search. A component that will anchor the architecture, or that's expensive to redo once built wrong, does.
Did the user leave the approach open? If they already named the specific algorithm/paper/library to use, or said "just implement it the simple way", they've already converged — don't re-open it. Abort.

If all three checks pass, proceed to Phase 1.

If any fails, ABORT and proceed with the direct implementation. Optionally append one sentence: "If you want this checked against arXiv prior art first, run
/neuroarxiv <your problem>
."

The loop

Three phases. Fetching is not divergence — it's find real documents, then read each in isolation, then converge. Skipping the isolation step turns this into an LLM guessing about papers it hasn't actually read.

Phase 0 — Categorize

Map the build problem onto 3-5 arXiv subject categories and 3-6 concrete search terms (the technical mechanism words — "cache invalidation", not "caching system"). Pick from the table below, or name another category id if you're confident of it.

Category	Covers
cs.AI	general AI systems, agents, planning, knowledge representation
cs.LG	learning algorithms, training methods, model architectures
cs.CL	NLP, language models, text processing
cs.CV	image/video understanding, generation, perception
cs.IR	search, ranking, recommendation, retrieval-augmented systems
cs.DC	distributed systems, consensus, sharding, replication, scheduling
cs.DB	storage engines, query processing, indexing, transactions, consistency
cs.SE	development practices, testing, program analysis, tooling
cs.PL	language design, type systems, compilers, runtimes
cs.CR	protocols, authentication, adversarial robustness, privacy
cs.NI	routing, congestion control, edge/CDN
cs.OS	kernels, schedulers, memory management, virtualization
cs.HC	interface design, usability, interaction models
cs.MA	coordination, negotiation, emergent behavior among agents
cs.RO	control, perception, manipulation, motion planning
cs.DS	algorithmic techniques, complexity, data structure design
cs.GT	mechanism design, auctions, incentive-compatible systems
stat.ML	statistical learning theory, probabilistic models
eess.SP / eess.SY	signal processing / control theory
math.OC	optimization, scheduling, resource allocation

If the problem is pure product/business framing with no obvious technical mechanism, say so plainly — but still commit to a best-effort technical angle. Most build problems have one (caching, consistency, ranking, scheduling, retrieval) even unphrased.

Phase 1 — Fetch (real HTTP, no generation)

For each chosen category, call WebFetch against arXiv's real export API — do not paraphrase this step from memory, actually fetch it:

https://export.arxiv.org/api/query?search_query=cat:<CATEGORY>+AND+(all:"<term1>"+OR+all:"<term2>")&start=0&max_results=4&sortBy=relevance&sortOrder=descending

Ask WebFetch to return, per

<entry>

: the arXiv id, title, abstract, authors, published date, and the

abs

pdf

links — verbatim from the feed, not summarized. This is a real Atom XML feed; treat every field as ground truth, never invent a paper, id, or detail not present in the response.

If a category returns fewer than 2 results, retry that category's query with the search terms dropped (

cat:<CATEGORY>

alone) — don't pad the result set with irrelevant hits to hit a target count. If everything comes back thin, say so in the output rather than manufacturing findings.

Courtesy: arXiv asks for one request at a time with a few seconds between calls. Fetch categories one after another, not concurrently.

Phase 2 — Diverge (read each paper in isolation)

For every paper collected in Phase 1, spawn a parallel Agent/Task call. One per paper. Each Agent gets only:

the build problem
that ONE paper's title, abstract, authors, year — no other paper
the instruction below

You are in DIVERGENT READ mode. You have exactly one paper's title and abstract, and one build problem. You do not know what other papers exist — do not assume, invent, or gesture at a broader survey. Read this abstract as if scouting prior art for someone about to build the stated thing from scratch. Never quote the abstract verbatim beyond a few consecutive words — paraphrase in your own words. Extract: approach (1-2 sentences, the core mechanism), borrow (1 sentence, the single most concrete implementable takeaway — imperative: "Use X to do Y"; if too tangential, say so plainly), limitation (1 sentence, the load-bearing weakness or breaking condition), relevanceNote (1 short clause on fit to the stated problem). Output JSON only:
{"approach":"...","borrow":"...","limitation":"...","relevanceNote":"..."}

Critical invariant. These calls must be parallel and isolated. A read that has seen other papers' abstracts starts summarizing the SET instead of grounding in the ONE paper in front of it — that's a subtler failure than ADHD's cross-talk collapse, and easy to miss because the output still looks paper-specific.

Phase 3 — Converge (one path, not a shortlist)

After all reads return:

Score. Rate each reading 0-10 on: relevance (fit to the stated problem), practicality (buildable by a small team without exotic infra), rigor (does the abstract itself show real evidence — benchmarks, proofs, a shipped system — vs pure concept). Flag a "trap" when a paper's own stated limitation implies a failure mode a builder would otherwise rediscover the hard way. Always pair it with a "strength" — the one concrete thing that paper's approach gets right.
Cluster. Group readings into 3-6 clusters by underlying architectural angle (not by paper, not by keyword): "cache-invalidation plays", "consensus-free plays", "learned-index plays".
Pick ONE. Choose the cluster with the strongest relevance + practicality combination — not the most novel, not the most cited, the one an engineer should actually build. This is the point of departure from wide-open brainstorming: NeuroArxiv commits to a single recommendation, because "here are 4 papers, you decide" is exactly the time-wasting the skill exists to prevent.
Synthesize. For the chosen cluster, produce: a 4-8 sentence implementation sketch (actionable, not a lit-review summary), citations (paper id + title + url + role — "primary mechanism" / "supporting evidence" / "failure mode to avoid" — grounded only in fetched data), the first concrete step, the load-bearing risk, and an "avoid" list pulled from every paper's limitation (not just the winner's — a pitfall named by a paper in a rejected cluster is still worth avoiding).
Name the runner-ups. One honest sentence per non-chosen cluster on the real trade-off that lost it the pick. Not a dismissal — the builder should be able to switch paths later knowing why.
One open thread. A question the read papers raise but don't answer — worth a design-review checkpoint before shipping.

Output shape

Searched. Categories, search terms, paper count.
Papers read. Grouped by cluster. Each paper: id, title, one-line approach, score chips
```
[rel8 prac6 rig7]
```
.
Prior-art pitfalls. Papers whose limitation flags a real trap — listed separately as watch-outs, not verdicts.
THE PATH. The one chosen cluster: sketch, citations, first step, load-bearing risk, avoid-list. This is the deliverable — make it bold and unmissable, not buried under the paper list.
Alternates considered, not chosen. One line each.
Open thread. The unanswered question.

Anti-patterns

Cross-contaminated reads. If a paper's read mentions "compared to the other papers here" or "collectively these show", isolation broke — discard and re-run that read alone.
Hallucinated citations. Never state a paper detail (a number, a claim, a result) that wasn't actually in the fetched abstract. If unsure, re-fetch rather than infer from the title.
Shortlist-as-cop-out. Ending Phase 3 with "here are 3 good options" instead of one recommendation defeats the purpose. Commit.
Padding a thin result set. Zero or few relevant papers is a valid, useful finding — it means the mechanism is either genuinely novel or the search terms were wrong. Say so. Don't stretch tangential papers to look like coverage.
Treating a paper's abstract as the whole paper. The abstract is a pointer, not ground truth about implementation details it doesn't state. The "borrow" and "avoid" items should stay at the level of what the abstract actually supports.

Calibration

How many papers? Default 4 per category × 3-5 categories ≈ 12-20 papers. Scale down for narrow/well-known mechanisms (2 per category is enough when the space is small), up for genuinely unclear territory.
When to stop widening? If a category-only retry (terms dropped) still returns nothing usable, say so and move on — don't cascade into unrelated categories chasing a result count.

Cost

1 categorize + N isolated reads (typically 12-20) + 1 score + 1 cluster + 1 converge ≈ N+4 Agent-shaped calls, plus real arXiv HTTP fetches (~3s courtesy delay between categories). Not for every design decision — for the ones where getting the architecture wrong costs real rework.

Companion library and CLI

This repo also ships a Node/TS implementation (

src/

) that runs the same loop against real arXiv HTTP and the Claude Agent SDK — useful outside Claude Code, for scripted/batch runs, or when you want the fetch and parsing to be deterministic code instead of a WebFetch call.

npm install
npm run build
neuroarxiv "how should I cache LLM completions across requests?"

The skill above gives you the same loop inside Claude Code with no install required.

neuroarxiv

NPX Install

Tags

SKILL.md Content